High Bay LED Replacement Lamps
Providing an energy-efficient, plug and play alternative to metal halide & high pressure sodium lamps. The Foreverlamp series of plug-n-play high bay led lamps feature a patented cooling system and innovative design that allows for a quick and easy installation.
Each lamp is designed to work with the existing magnetic ballast and sockets and doesn’t require any re-wiring, reconfiguration and or contractors to install. Installation simply involves, unscrewing the existing lamp and replacing it with a Foreverlamp. As simple as changing a light bulb.
Foreverlamp products are key to creating efficiencies in sustainable warehouse, retail, recreational and commercial operations. These advanced LED lighting solutions enable customers to re-use their existing lighting fixtures in an eco-friendly manner by simply replacing a light bulb
- Replaces traditional Metal Halide Lamps for 1000W, 750W, 400W, 350W, 320W, 250W and 175W
- Replaces traditional High Pressure Sodium lamps for 400W and 250W
- Works with existing Magnetic Probe and Pulse Start ballasts
- Direct screw in replacement for mogul sockets, uses existing socket and ballast
- No rewiring required
- Saves up to 600 Watts Per Socket used on an existing 1000W Metal Halide
- Saves up to 200 Watts per socket used on an existing 400W MH or HPS.
- Instant On / Off
- Dimmable with LED driver
- UL Recognized (LM79 & LM80)
- 60,000 hours rated
- 5-year warranty
- Major installations nationwide
- Big Box Retail
- Sports Centers
- Automobile Dealerships
- Schools / Universities
- Storage Facilities
High Bay LED Lamps FAQs
• Is the light output of the Foreverlamp LED replacement lamps equivalent to the Metal Halide or High Pressure Sodium lamps it replaces?
Yes. The Foreverlamp LED replacement lamp series will replace 1000W, 400W, 320W, 250W and 175W Metal Halide (MH) or High Pressure Sodium (HPS) lamps and deliver the same light levels that the MH or HPS fixtures were originally designed to deliver.
Will the lamps suffer from lumen depreciation like in the case of metal halide lamps?
No. An added benefit of the Foreverlamp LED replacement lamp series is that it maintains a much more consistent light output level over its lifetime (50,000) + hours than that of a MH lamp, which suffers from rapid lumen loss.
Does the Foreverlamp LED replacement lamp require the starter used by the MH lamp?
Pulse-start ballasts have a starter that fires when the ballast sees an open circuit. This starter then shuts off as soon as the lamp starts conducting voltage. The Foreverlamp series conducts voltage immediately upon power being applied so the starter is not used by the Foreverlamp LED replacement lamp series.
Are the Foreverlamp LED replacement lamp suitable for installation with electronic as well as magnetic ballasts?
No. The Foreverlamp series is only suitable for use with pulse- or probe-start magnetic ballasts, using E39/EX39 mogul base, or in the Foreverlamp fixture with electronic driver.
Can I connect the Foreverlamp LED replacement lamp directly to a line voltage?
No. The Foreverlamp series cannot be directly connected to line voltage - it receives its power through the installed magnetic ballast.
Is the Foreverlamp LED replacement lamp series damp rated?
What is the temperature range in which I can use the Foreverlamp LED replacement lamps?
The Foreverlamp series can be used in a temperature range of -20C to +55C.
Can the Foreverlamp LED replacement lamp be installed in lensed or enclosed fixtures?
No. The Foreverlamp series must only be installed in an open fixture with air flow.
What are the Foreverlamp Certifications and Testing?
The Foreverlamp is UL listed and UL recognized. Foreverlamp maintains appropriate LM80, LM79, ISTMT, and TM21 laboratory testing results, available upon request.
Foreverlamp Certifications and Testing?
Will the Foreverlamp LED replacement lamp extend the life of my installed ballast?
The Foreverlamp LED Replacement Lamps require much less work from the installed ballast than the Metal Halide lamps they replace, so the ballast operates at a much cooler temperature. Initial examination indicates that installation of the Foreverlamp LED Replacement Lamp may actually extend the life of the ballast by 2 to 3X. The starter which is the most common component to fail in a Metal Halide system is not needed to operate the LED replacement lamps. Therefore, a defective starter will have no effect on the operation of the lamps
What happens if the ballast fails?
If the installed ballast fails, it would need to be replaced to continue to operate the Foreverlamp LED replacement lamps.
What LED chips are used in the Foreverlamp LED replacement lamp?
Nichia, a world leader in LED chip design and manufacturing makes the LEDs used within the Foreverlamp LED replacement lamps.
Will the Foreverlamp LED Replacement Lamps qualify for any rebates?
Several models of the Foreverlamp LED Replacement Lamps are LDL qualified, and are continually updating. Please contact your local utility provider directly for further details on incentives available in your marketplace.
How can I receive further assistance regarding a purchase of the GS & PS series Foreverlamp products?
Send an email to firstname.lastname@example.org or call Foreverlamp at 844-LED (533)-8811 today to discuss your lighting needs.